Using Vahana VR, you can output your 360 stream directly to an HTC Vive plugged to the same computer used with Vahana VR.
We explain below how to set up this output.
- Steam and Steam VR are already installed on your computer.
- Your Vahana VR output is already calibrated and ready to send to the HTC Vive
1. Room set up
This needs to be done every time you do your setup in a new room
The full procedure can be found here: https://support.steampowered.com/kb_article.php?ref=2001-UXCM-4439
Please note that you might need to update the firmware of the base station or the controller:
Or if you have the consumer version:
2. Steam VR set up
Make sure you have enough space to use your HTC Vive and that the base stations are correctly placed.
Connect the HTC Vive to your computer via the USB and HDMI cables.
Turn the base stations and the Vive hub on
Start Steam and Steam VR, the status should be "Ready" with headset and base station icon in green
3. Vahana VR setup
Add a new output and choose the HTC Vive view:
Go back to the panorama tab and enable the HTC Vive output by clicking on the HTC Vive icon
You should now be able to see your 360 panorama in the HTC Vive.